DENKA THERMOSHEET BOPS
This is a biaxially oriented polystyrene sheet. Made from Polystyrene Resin, this sheet uses the material’s transparency, hardness, and food safety, and orients it biaxially to increase its mechanical strength. It is used widely as a food container.
This product is heat molded into clear containers. It is mainly used as a food container. Molded products are colorless, transparent, and glossy, improving the appeal of the products they contain. The material's hardness enables the walls to be made thinner, which makes the containers lighter.
Lids, food packs, trays, etc.
General properties of DENKA THERMOSHEET BOPS,
Heat Resistant BOPS(TYPE T）, High Heat Resistant BOPS(TYPE R）
|Sheet thickness .25 mmt||Type Ｇ||Heat Resistant BOPS(TYPE T）||High Heat Resistant BOPS(TYPE R）||Test method|
|All light transmission rate (%)||91.0||91.0||91.0||JIS 7361-1 compliant|
|Haze(%)||1.3||1.3||1.5||JIS 7136 compliant|
|Tensile rupture resistance (MPa)||65||73||73||JIS K7127 compliant|
|Young's modulus (GPa)||3.0||3.2||3.2||JIS K7127 compliant|
|Tensile elongation(%)||3.5||3.0||3.0||JIS K7127 compliant|
The properties in this table are measured values. They are not guarantees.
BOPS sheets・Mighty Guard Product
Household Packaging Materials Department
- It is the customer’s responsibility to always test products before use and confirm their fitness for purpose and safety.
- Any product contained on this Website or any product using a product contained on this Website should be disposed of in accordance with laws and regulations.
- Before use, please confirm the detailed method of use, precautions, and other information by using the technical documentation and Material Safety Data Sheet. These materials are available from the relevant Division. Please request them.
- The information contained in this website is subject to change without notice as new knowledge becomes available.